Machine handling – SetupRobotics https://setuprobotics.com The world’s #1 Lean Optimizing End-effector Thu, 01 Oct 2026 08:42:24 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://setuprobotics.com/wp-content/uploads/2021/11/cropped-SetupRobotics-Favicon-logo-32x32.png Machine handling – SetupRobotics https://setuprobotics.com 32 32 Door handler https://setuprobotics.com/product/door-handler/ Wed, 07 Jan 2026 22:24:23 +0000 https://setuprobotics.com/?post_type=product&p=3339 Ultra fast setup door closer

]]> CNC Vice Closer https://setuprobotics.com/product/cnc-vice-closer/ Wed, 01 Dec 2021 13:39:33 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=860 The task of CNC Vice Closer is Opening and closing of LANG using XYZ movements.

Interface to robot using basic XYZ movements

The kit consist of 3 components:

  • LANG vice crank arm
  • Spindle tool with: spring loaded vice closer and communication to control unit using XYZ movements
  • Control unit IP68 sending commands to robot

The control unit can send 3 commands to robot

  1. Request new item. – Robot pick&place new item in vice
  2. OK to start CNC, Vice closing force in the expected range – Robot start CNC
  3. VICE ERROR, Vice closing force not in the expected range – Robot show error message

 

Prerequisites for use:

The vice closer is extremely simple to install but has the following conditions of use:

  • The CNC must have force monitoring and and be able to withstand the applied forces
  • The CNC must have a working safety door there looks while CNC is running.
  • Items thickness on clamping surfaces must be equal within +/- 0.15mm, crank arm adjusted horizontal at +/-0.05

 

In the box
• Spindle tool with: compression spring, sliding block and sensor magnet.
• Crank arm for LANG vice
• Control unit with magnet sensors
• LANG zero fixture
• M12 – 8 pole cable 5 meter
• M12 – 8 pole panel connector, 500mm stranded wires

 

Downloadable content:

CNC Vice Closer Manual

]]>