single tool base – SetupRobotics https://setuprobotics.com The world’s #1 Lean Optimizing End-effector Fri, 18 Sep 2026 13:21:01 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://setuprobotics.com/wp-content/uploads/2021/11/cropped-SetupRobotics-Favicon-logo-32x32.png single tool base – SetupRobotics https://setuprobotics.com 32 32 Vacuum Gripper 40mm https://setuprobotics.com/product/vacuum-gripper-40mm/ Sun, 07 Jul 2024 20:46:37 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=816 Vacuum Gripper G1/8″, 40mm cup, 26mm extension

A suction gripper is a simple yet effective gripper for handling of items.

By having the atmospheric pressure applied to the surface of an item and the pressure removed inside the suction gripper a clamping force is generated.

With our large range of vacuum/suction Grippers the opportunities are endless.

 

There are many advantages using a suction gripper:

• Enormously selection of different types from many sources.
• Low cost
• No adjustments
• Grip directly on item surface. (no space needed for gripper fingers)
• Items can be placed close together.
• Gently handling yet very powerful.

 

Vacuum generation
The Toolbase uses an industrial standard venturi pump delivering 85% vacuum and a flow of 6 l/min.

 

Feedback
The ToolBase measures the pressure inside the suction gripper. When the pressure is below a predefined level the ToolBase signals back to the robots an item is grapped.

 

Pick & Place timing:
This venturi principle of vacuum generation is way faster than electrical motor based vacuum pumps therefore the reaction time is typically a few milliseconds in comparison to the 300 milliseconds or more to what motor based pump uses.
Also at place the ToolBase is fast as a release blow is generated directly into the suction cup. In comparison many electrical suction grippers only releases to neutral pressure resulting in a long delay before the robot can move away after a place.

 

CASE: Timing cost:
A robot cell handles 1 item every 1 minute for one year at a cell cost of $100/hour and a vacuum/release generation time of 0,5 second the year cost is: $7300
Typical electrical vacuum gripper cost: (365 * 24 * 60 * 0.5) *($100 / (60*60)) = $7300
Typical venturi vacuum gripper cost: (365 * 24 * 60 * 0.1) *($100 / (60*60)) = $1460

Yearly savings: $7300 – $1460 = $5840

 

*Must be mounted on our ToolBases.

]]> Vacuum bar 200-400mm incl. 2 arms https://setuprobotics.com/product/vacuum-bar-200-400mm-incl-2-arms/ Sun, 25 Jun 2023 10:10:06 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=1234 Vacuum bar 200-400mm incl. 2 arms (no cups)

 

Customization

As standard, we provide a range of suction cup sizes to suit various applications, 10, 20, 30, 40, 50mm. These standard sizes offer versatility for many tasks. But for specialized projects and unique demands, we also offer customized suction cups.

]]> Magnet Gripper 4x Pneumatic https://setuprobotics.com/product/magnet-gripper-4x-pneumatic/ Sun, 25 Jun 2023 10:02:53 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=1219 Magnet Gripper 4x Pneumatic.

*Must be mounted on our ToolBases.

 

]]> Electric Magnetic Gripper https://setuprobotics.com/product/magnet-gripper-electric/ Sun, 25 Jun 2023 09:51:12 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=1210 The Electric Magnet Gripper is the ultimate solution for efficient and reliable object handling. This innovative gripper utilizes high-quality magnets to securely grasp and manipulate objects with ease.

 

Simplify Your Workflow with Powerful Magnetic Grip

Equipped with an inductive sensor center, the Electric Magnet Gripper ensures precise positioning and alignment. This advanced sensor technology enhances accuracy and simplifies the handling process, guaranteeing optimal results every time.

Designed for convenience and versatility, this gripper is electrically powered, eliminating the need for external air sources or pneumatic systems. Enjoy seamless integration and flexibility in various applications, from industrial automation to assembly lines and beyond.

 

Maximize Productivity and Efficiency

Experience effortless and efficient object handling with the Electric Magnet Gripper. Maximize productivity, reduce downtime, and elevate your workflow with this cutting-edge solution. Reduce manual struggles and embrace the power of magnet technology for your handling needs.

*Must be mounted on our ToolBases (TB-S or TB-D).

]]> Dual Bottle Gripper https://setuprobotics.com/product/dual-bottle-gripper/ Sun, 25 Jun 2023 09:27:03 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=1190 The Dual Bottle Gripper’s smart design combines functionality with versatility. Its dual-grip mechanism allows you to securely hold and manipulate two bottles at once, streamlining your workflow and maximizing efficiency. Whether you’re in a laboratory, manufacturing facility, or any setting that requires bottle handling, this gripper is tailored to meet your needs.

Active payload – 11 kg

Must be mounted on Single Tool Base (TB-S sold separatelly or search for kit)

 

 

 

 

]]> Digitizer https://setuprobotics.com/product/digitizer/ Mon, 13 Dec 2021 20:21:31 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=958 The ToolBase digitizer makes it simple to orient as a coordinate system when programming the robot.

Simply make a TCP in the robot controller at the digitizer pointer tip.

A working plane can now be taught by digitizing 3 points. (typically origo, X axis and XY plane). When programming the robot tool points are simply X,Y and Z added the length difference between digitizer and Tool

*Must be mounted on our ToolBases TB-S or TB-D

]]> ScrewDriver https://setuprobotics.com/product/screwdriver/ Mon, 13 Dec 2021 20:07:22 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=947 ToolBases.]]> The SetupRobotics screwdriver charges an internal battery bank during spare time moving to and from the screw dispenser and doing other tasks. Therefore no extra cables are needed.

 

The ScrewDriver uses the ToolBase vacuum for screw pick-up, therefore in addition to steel screws it’s also possible to pick non magnetic screws in stainless steel, brass and other.  Feedback to the robot is screw presence (vacuum level) and also screw torque was obtained at end. The two signals are separated when using MODBUS communication. The screwing task setup is done directly on the screwdriver via a LCD keypad.
]]> ToolBase Single https://setuprobotics.com/product/toolbase-single/ Mon, 13 Dec 2021 19:41:54 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=928 SetupRobotics makes ultra fast production switch.
The stemcell in all SetupRobotics products is the ToolBase. The introduction of cobots made it simple to use robots but it is still complicated to configure all different tools. Attempts have been made with tool changers including all signals going to the back of the robot solving all different tasks.
The patent behind the ToolBase only having two valves is extremely simple:-Vacuum gripper:  One valve makes vacuum, the other makes the release blow.-Finger gripper:  One valve opens, the other closes.-Dispenser: One valve dispenses the other back-suck to prevent dripping.
Every tool has a key that tells the ToolBase what to do. Upon closing the quick coupling the tool is configured. No special apps, no wiring or other. Everything is handled by the ToolBase.
Any tool can be activated from the same single output and feedback is given to a single input.
The patented ToolBase detects which tool is fitted and handles all the technical details.
  • Energy: 24V, compressed air, vacuum.
  • Signals: control, feedback, data communication
  • Mechanics: Strong quick coupling with precise positioning
The range of tools is continuously expanding:
  • Pneumatic 2 and 3 finger grippers
  • Suction grippers
  • Pneumatic magnetic grippers
  • Electric magnetic grippers
  • Glue and seal Dispensers
  • Screwdrivers
  • Bottle gripper
  • UV curing lamp
]]> Vacuum gripper adapter G1/8″ https://setuprobotics.com/product/vacuum-adapter-g1-8/ Wed, 01 Dec 2021 12:51:41 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=837 This is the Vacuum Adapter G1/8″ needed for Vacuum/Suction Gripper.
(A Vacuum Adapter is included when buying Vacuum Grippers)

A suction gripper is a simple yet effective gripper for handling of items.

By having the atmospheric pressure applied to the surface of an item and the pressure removed inside the suction gripper a clamping force is generated.

With our large range of vacuum/suction Grippers the opportunities are endless.

 

There are many advantages using a suction gripper:

• Enormously selection of different types from many sources.
• Low cost
• No adjustments
• Grip directly on item surface. (no space needed for gripper fingers)
• Items can be placed close together.
• Gently handling yet very powerful.

 

Vacuum generation
The Toolbase uses an industrial standard venturi pump delivering 85% vacuum and a flow of 6 l/min.

 

Feedback
The ToolBase measures the pressure inside the suction gripper. When the pressure is below a predefined level the ToolBase signals back to the robots an item is grapped.

 

Pick & Place timing:
This venturi principle of vacuum generation is way faster than electrical motor based vacuum pumps therefore the reaction time is typically a few milliseconds in comparison to the 300 milliseconds or more to what motor based pump uses.
Also at place the ToolBase is fast as a release blow is generated directly into the suction cup. In comparison many electrical suction grippers only releases to neutral pressure resulting in a long delay before the robot can move away after a place.

 

CASE: Timing cost:
A robot cell handles 1 item every 1 minute for one year at a cell cost of $100/hour and a vacuum/release generation time of 0,5 second the year cost is: $7300
Typical electrical vacuum gripper cost: (365 * 24 * 60 * 0.5) *($100 / (60*60)) = $7300
Typical venturi vacuum gripper cost: (365 * 24 * 60 * 0.1) *($100 / (60*60)) = $1460

Yearly savings: $7300 – $1460 = $5840

*Must be mounted on our ToolBases.

Downloadable content:

Vacuum Gripper Manual

]]> Vacuum Gripper 4x50mm https://setuprobotics.com/product/vacuum-gripper-4-x-50mm/ Wed, 01 Dec 2021 12:39:23 +0000 http://newwebsite.setuprobotics.com/?post_type=product&p=836 A suction gripper is a simple yet effective gripper for handling of items.

By having the atmospheric pressure applied to the surface of an item and the pressure removed inside the suction gripper a clamping force is generated.

With our large range of vacuum/suction Grippers the opportunities are endless.

 

A 4x gripper for any task:

Comes in 6 varaints:

  • 4 x 10mm
  • 4 x 16mm
  • 4 x 25mm
  • 4 x 32mm
  • 4 x 40mm
  • 4 x 50mm

 

There are many advantages using a suction gripper:

• Enormously selection of different types from many sources.
• Low cost
• No adjustments
• Grip directly on item surface. (no space needed for gripper fingers)
• Items can be placed close together.
• Gently handling yet very powerful.

 

Vacuum generation
The Toolbase uses an industrial standard venturi pump delivering 85% vacuum and a flow of 6 l/min.

 

Feedback
The ToolBase measures the pressure inside the suction gripper. When the pressure is below a predefined level the ToolBase signals back to the robots an item is grapped.

 

Pick & Place timing:
This venturi principle of vacuum generation is way faster than electrical motor based vacuum pumps therefore the reaction time is typically a few milliseconds in comparison to the 300 milliseconds or more to what motor based pump uses.
Also at place the ToolBase is fast as a release blow is generated directly into the suction cup. In comparison many electrical suction grippers only releases to neutral pressure resulting in a long delay before the robot can move away after a place.

 

CASE: Timing cost:
A robot cell handles 1 item every 1 minute for one year at a cell cost of $100/hour and a vacuum/release generation time of 0,5 second the year cost is: $7300
Typical electrical vacuum gripper cost: (365 * 24 * 60 * 0.5) *($100 / (60*60)) = $7300
Typical venturi vacuum gripper cost: (365 * 24 * 60 * 0.1) *($100 / (60*60)) = $1460

Yearly savings: $7300 – $1460 = $5840

*Must be mounted on our ToolBases.

]]>